|
Post by neil on Jun 23, 2012 6:15:07 GMT -5
I have alot of parts, and don't really feel like listing everything, so ask and I will let you know if I have it, and how much.
All the custom work, leaves a surplus of stock parts, so if your looking for something just ask
I have to start posting items I guess. Reasonable offers will not be refused. Shipping costs will be added to the final price if required.
2 CJ 7 grilles
CJ 7 steering box
2 or 3 CJ dashes,some with gauges
Gas tanks.......CJ and YJ....multiple
Lots of axles that are complete and pieced. 1 set of CJ narrow tracks, 1 set of wide tracks, multiple 30's and 35's.
and a whole lot more.........I'll post as I have things ready to go.
|
|
|
Post by neil on Mar 2, 2013 8:04:24 GMT -5
here's a couple more items.
YJ steering box
couple steering columns(cj)
YJ hood
YJ tail gate
YJ grille and rad support
again...... no reasonable offers refused.
|
|
wonk
Moderator
Life is tough. It's tougher when you're stupid.
Posts: 1,080
|
Post by wonk on Mar 2, 2013 10:04:03 GMT -5
I know it would be a haul Neal but last year I sold almost EVERY TJ take off part I had at the semi-annual swap meet at GravelRama at Cleves Ohio last year. I sold stuff that I thought was a total waste of my time dragging over there. I sold parts that I had tried to give away here at home that people wouldn't drive across the bridge to pick up (some guy bought 6 TJ bumper plastic end caps for $5 each). Dewaine sold CJ axles, trannys, an engine, and a bunch of TJ parts too. We both went home with a pocket full of cash.
|
|
Brian
Moderator
Donator
CSM, U.S. Army
Posts: 1,470
|
Post by Brian on Mar 2, 2013 22:23:20 GMT -5
Neil, what are the dimensions of the YJ tail gate? I need to replace the one on my trailer...I have a bunch of TJ stuff too...it is on my list of things to do is take photos and get it all up on Craigslist...we have a swap meet here, but not till October and I want this stuff gone so I can park at least one vehicle in the garage
|
|
|
Post by neil on Mar 3, 2013 10:01:12 GMT -5
I really have to get serious about selling off everything,but the main problem is time at the moment.
Brian, I believe I have 1 or 2 cj tailgates also. I'll get some measurements later today for you.
|
|
|
Post by neil on Mar 3, 2013 17:50:18 GMT -5
Looks like the CJ and YJ tailgates are the same dimensions.
35.5" x 16"
|
|
Brian
Moderator
Donator
CSM, U.S. Army
Posts: 1,470
|
Post by Brian on Mar 8, 2013 21:00:16 GMT -5
Yeah I need one that is like 39"x19"...I may have to have one made...
|
|
|
Post by yjsaabman on Mar 9, 2013 9:01:43 GMT -5
Keep in mind the CJ gates are bottom hinged, and the YJ gate is side hinged.
|
|
|
Post by Halo Performance on Mar 9, 2013 13:31:24 GMT -5
Check out th All Breeds Jeep show in York PA. Not as much of a hike as Ohio, and may be good to unload stuff. I think its usually July
|
|
|
Post by neil on Mar 10, 2013 20:07:06 GMT -5
Do they have vendors down there. I never went down there, deffinitely should check it out tho.
|
|
|
Post by yjsaabman on Mar 16, 2013 10:03:21 GMT -5
They definitely have a swap meet area, Neil. I've always missed it, too, as it always seems to overlap with something else I have going on. Dave is right, usually happens in July at the York Fairgrounds. It's put on by the PA Jeeps club.
|
|
|
Post by deltacottonboy12 on May 6, 2013 20:14:06 GMT -5
Well, Just found the passenger side shock was bad. The lower bushing is about ripped off. Heard a clicking noise with any type of movement and got under there and found the clicking. I am going buy a new shock for the passenger side and use the upper mounting bracket for the driver side. The new shock will come with a new mounting bolt.
I appreciate the offer Brian.
|
|