|
Post by Halo Performance on Oct 23, 2012 14:54:19 GMT -5
Www.qwikvalve.com Just arrived yesterday. Simple install once i took my skid plates off. Pull plug, drain oil, install valve in place of old bolt. The nice feature is being able to drain my oild without a huge mess. My Rusty's engine skid works well, but the access hole does not work too well as a drain hole. Most oil fills the skid, pours everywhere. Now I can keep a 7" length of old fuel line attached, and drain it right into a catch can, no mess, no hot oil on the hands. When done, just leave the hose on top of the skid plate. I will more than likely keep a bolt in the other end of the fuel line to prevent debris from getting into it. $27 well spent.
|
|