|
Post by neil on Oct 16, 2013 5:43:29 GMT -5
I have two used dana 44 trac-loc's. Both were out of front axles, so mileage is low. 150 ea.
One trac-loc is a series 3 and the other a series 2. series 3 is basically 3.92 and up and a 2 is 3.90 and down or get a thick cut ring gear to run a lower ratio.
Also have a 4:56 gear set for a 44, I have to double check, but it may be a reverse cut,high pinion.
Also have two 4:10's for 44's have to check rotations on them also to make sure. 40 each on the gear sets.
These are in good used condition.
|
|