|
Post by yjsaabman on Mar 15, 2007 18:00:12 GMT -5
We'll just keep this one running and people can add to it.
AAL: Add-a-leaf, a secondary leaf added to the leaf pack to increase ride height and weight capacity.
SYE: Slip Yoke Eliminator, eliminates the slip yoke tail housing on the transfercase for a fixed driveshaft yoke and a slip yoke in the driveshaft. Usually goes with a CV driveshaft
The rest copied and pasted from various posters on the old board:
SOA: Spring over axle
SUA: Soring under axle
SBD: Sway bar dissconnects
OBA: On board air
BB budget boost. Consists of coil spring spacers and/or leaf spring blocks
LA lift: long arm lift: removes original control arms and mounts, changes suspension geometry, allowing more articulation
UCA upper control arms (coil spring vehicles) LCA Lower control arms (coil spring vehicles)
TRE tie rod ends
IAT Intake Air Temperature sensor
TPS-throttle positioning sensor
EGR Valve- exhaust gas recirculation valve
MAF sensor-Mass air flow
MAP-manifold absolute pressure sensor, monitors difference in pressure between the intake manifold at outside atmosphere.
CPS-crank/crankshaft/camshaft positioning sensor
PCV-positive crankcase ventilation valve. Used for emissions
IFS- Independent front suspension
SFA/SRA Solid front/rear axle
|
|