|
Post by UnlimitedNJ on Jul 11, 2008 2:21:32 GMT -5
|
|
|
Post by UnlimitedNJ on Jul 20, 2008 12:50:59 GMT -5
|
|
|
Post by neil on Jul 21, 2008 6:00:57 GMT -5
No problem Will!
|
|
wonk
Moderator
Life is tough. It's tougher when you're stupid.
Posts: 1,080
|
Post by wonk on Jul 21, 2008 9:10:01 GMT -5
What happened to it Will or was it never there? You really seem to be doing well without it.
|
|
|
Post by UnlimitedNJ on Jul 21, 2008 17:33:44 GMT -5
It was never there. Was regearing and my LSD was totally smoked so I decided on an OX. Thought about an ARB or a Detroit but I didn't want to have to deal with a compressor and air lines and a Detroit is a little unforgiving on the street especially with a manual trans. Keeping the aussie in front for now. Probably go with another OX when I put a 44 up front, either a waggy 44 or an HP44 from a bronco.
|
|
|
Post by UnlimitedNJ on Aug 28, 2008 19:09:10 GMT -5
Picked up this trailer off of craigslist. Dirt cheap. Needs a little work, but for the price I couldn't have even bought an axle and hubs to make one myself.
|
|
|
Post by UnlimitedNJ on Oct 8, 2008 1:50:59 GMT -5
After some work the trailer is done for now. One tire, repacked the bearings, seals, light kit, plywood floor bolted down with eye bolts, Rustoleum Army green paint and new chains for the tailgate.
|
|
|
Post by neil on Oct 9, 2008 16:26:17 GMT -5
Don't look bad at all Will!
|
|
jcg230
Puddle Splasher
Shocker
Posts: 42
|
Post by jcg230 on Oct 22, 2008 20:56:12 GMT -5
ahhh toodely doodly doo
|
|
|
Post by UnlimitedNJ on Nov 1, 2008 13:35:07 GMT -5
Hit 100,000 miles the other night on my way to work.
|
|
|
Post by UnlimitedNJ on Nov 1, 2008 14:45:27 GMT -5
|
|
|
Post by neil on Nov 4, 2008 5:25:59 GMT -5
Did ya?
|
|
|
Post by yjsaabman on Nov 4, 2008 17:13:05 GMT -5
You certainly do drive the piss outta that thing!!
|
|
|
Post by Halo Performance on Nov 11, 2008 1:37:11 GMT -5
100k? Man thats a lot of miles. STill holding up I see
|
|
|
Post by UnlimitedNJ on Nov 13, 2008 18:25:18 GMT -5
Yeah its holding up pretty good. Got a few things I need to address (springs, steering, cats, motor mounts); I'll get to them eventually.
|
|